Solutions / Thin Gauge / Memory Module Trays
Custom Memory Module Trays for Server Decommissioning and Recycling
When memory is pulled from retired servers, every module carries resale or recovery value. Blue Ridge Thermoforming builds custom ESD trays that protect DIMMs and memory cards from the decommissioning floor through grading, storage, and resale or component recovery.
Request a QuoteCustom DIMM trays and memory module trays keep modules oriented from the moment they leave a server. Pockets are sized to the modules you send, including taller modules. Counts per tray follow how your teams pull, test, and lot parts.
We supply the packaging for that workflow. Sorting, testing, and recovery stay with your team. Static control is the same family of materials described on ESD and anti-static packaging. DDR5 modules are on DDR5 DIMM trays, laptop memory is on SODIMM trays, and the full set is on electronics trays.
Built for the ITAD workflow
SODIMM trays and DIMM pockets
Pockets sized to your modules, including DIMM and SODIMM layouts and taller modules.
Counts for pull, test, and lot
Trays hold the quantity your teams already use for testing and audit checks.
Stacking for carts, totes, and cartons
Secure stacks for the decommissioning floor, storage, and shipment.
Grade protection in transit
Server memory trays use static-dissipative or conductive materials so ESD damage does not cut grade or resale value. Secure pockets and lids limit edge-connector damage.
Protecting value in transit and storage
- Static-dissipative or conductive materials for ITAD packaging and server recycling trays.
- Clear or black static-dissipative options for inspection and grading.
- RAM tray packaging keeps modules in one orientation for counting, testing, and audit checks.
- Reusable thin-gauge designs for repeat decommissioning projects.
- Recyclable PET and rPET options where the ESD grade allows.
Supporting recovery and recycling
- Trays keep material sorted and counted by lot on the way to component recovery
- Clamshells when a single module needs its own pack
- Separate trays or a shared layout after you share the mix in a lot
- Blue Ridge Thermoforming forms the trays for the recovery workflow
From drawing or sample to production
- Send a CAD file, drawing, or physical sample part.
- We engineer the tray design and material recommendation.
- Prototype and fit-check with your parts.
- Scale to low- or high-volume production under ISO 9001:2015 quality processes.
Memory Module Tray FAQs
Can one tray hold different module types?
Share the mix in the lot. We will propose a layout that keeps each module type oriented, or separate trays when one layout would compromise fit.
Do you make clamshells for single-module resale?
Yes. We thermoform clamshells as well as trays. Tell us when a single module needs its own pack.
Can trays be reused across decommissioning projects?
Yes. Durable thin-gauge designs can be built for repeat use.
Design a tray around your recovery workflow
Send us a sample module and your counts, and we will design a tray around your recovery workflow.